Table of Contents
Advertisement
5 CONTROLS
5.2.E CUTTER SWITCH ____________________________________________________
This switch engages cutter rotation.
To cut grass, push the switch and move the joysticks forward to lower the cutting units.
When engaged the yellow LED on the pod is illuminated.
To stop rotation, push the rear of the rocker switch.
When lifted out of work or the operator leaves the seat, cylinder rotation is stopped.
5.2.F BEACON SWITCH (OPTIONAL)_________________________________________
Turns the beacon ON and OFF.
Push the front of the switch to turn ON
Push the rear of the switch to turn OFF
5.2.G 4 WHEEL DRIVE IN REVERSE DIRECTION SWITCH ________________________
Engages 4 wheel drive while the vehicle is in reverse direction. Hold the switch to keep
engaged.
Push the front of the switch to turn ON
Release the switch to turn OFF
5.2.H CRUISE CONTROL SWITCH ___________________________________________
Used to engage the cruise function when the cutters are engaged.
Automatic mode should be selected to enable cruise control.
To engage cruise control:
Push the rocker switch to engage the cruise function.
To disengage cruise control
Push the rocker switch to disengage the cruise function.
Note. Operation of the transmission pedal, applying the parking brake and reactivation
of the cruise control switch will deactivate the cruise control.
en-23
Advertisement
Table of Contents
