Manual Sensor Cleaning - Canon MARK III EOS-1 DS Instruction Manual

Manual Sensor Cleaning

3
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
For the power source, using the AC Adapter Kit ACK-E4 is
recommended.
If you use a battery, make sure it is fully recharged.
Select [Sensor cleaning].
1
Under the [7] tab, select [Sensor
cleaning], then press <0>.
Select [Clean manually].
2
Turn the <5> dial to select [Clean
manually], then press <0>.
Select [OK].
3
Turn the <5> dial to select [OK],
then press <0>.
In a moment, the mirror will lockup
and the shutter will open.
"CLn" will blink on the top LCD panel.
End the cleaning.
4
Set the power switch to <2>.
135