Manual Sensor Cleaning - Canon EOS 77D Instruction Manual

Manual Sensor CleaningN
3
Dust that could not be removed by the automatic sensor cleaning can
be removed manually with a commercially-available blower, etc. Before
cleaning the sensor, detach the lens from the camera.
The image sensor is extremely delicate. If the sensor needs to be
cleaned directly, having it done by a Canon Service Center is
recommended.
If you use a battery, make sure it is fully charged.
Using the household power outlet accessories (sold separately, p.422) is
recommended.
Select [Sensor cleaning].
1
Under the [54] tab, select [Sensor

cleaning], then press <0>.
Select [Clean manually].
2
Select [Clean manually], then press

<0>.
Select [OK].
3
Select [OK], then press <0>.

 In a moment, the reflex mirror will lock
up and the shutter will open.
"CLn" will blink on the LCD panel.

Clean the sensor.
4
End the cleaning.
5
Set the power switch to <2>.

343