Changing Image Playback Settings; Setting The Lcd Monitor Brightness; Setting The Image Review Time - Canon MARK III EOS-1 DS Instruction Manual

Changing Image Playback Settings

3 Setting the LCD Monitor Brightness

You can adjust the brightness of the LCD monitor to make it easier to
read.
To check the image's exposure, you should look at the histogram (p.118).

3 Setting the Image Review Time

How long the image is displayed on the LCD monitor immediately after
capture can be set. To keep the image displayed, set [Hold]. To not
have the image displayed, set [Off].
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
Select [LCD brightness].
1
Under the [6] tab, select [LCD
brightness], then press <0>.
Adjust the brightness.
2
While referring to the gray chart, turn
the <5> dial, then press <0>.
Select [Review time].
1
Under the [2] tab, select [Review
time], then press <0>.
Set the desired review time.
2
Turn the <5> dial to select the time,
then press <0>.
129