Cable Gland Assembly - Verkada CD52 Install Manual

Installation

Cable Gland Assembly 1/2

To seal the Ethernet cable,
disassemble the cable gland and
feed the Ethernet cable through
the baseplate through-hole.
1. Place the rubber seal around the
cable. Push the plastic collar firmly
over the rubber seal until it snaps
into position.
2. Firmly insert the seal and collar
assembly into the pass-through
until it is secured in position.
5
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.