Verkada CD52 Install Manual page 3

Introduction
What's in the box
CD52 Outdoor Camera
2 Pole straps
4 M4 x 25mm PH2
wall screws
What you'll need
A working Internet connection.
●
802.3af Power over Ethernet (PoE) switch,
●
or a PoE injector. For operation below
-20° C, use 802.3at PoE.
A smartphone or laptop
●
A #2 Phillips screwdriver or power drill
●
with a #2 Phillips driver bit
1/4 inch (6.5mm) drill bit for wall anchors
●
1/8 inch (3mm) drill bit for pilot holes
●
A Cat5 or Cat6 Ethernet cable with a
●
0.2-0.25 inch outside diameter
(5-6.5mm)
3
Mount plate
(Attached to camera)
Cable gland wrench
4 Wall anchors
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401 Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
Mounting template
T10 Security Torx screwdriver
Desiccant
(with 2 screws and anchors)
Connect
For easy registration and setup, scan the QR
code on the product.
If you prefer to manually register your product, If you prefer to manually register your product, If you prefer to manually register your product,
please proceed to: verkada.com/start
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Conduit adapter