Download Print this page

Verkada CD52 Install Manual page 12

Outdoor dome camera

Hide thumbs Also See for CD52:

Installation

Grounding

In order to attach the

Note

green-yellow grounding cable to

the camera, perform the

following:

Align a 20AWG or larger

grounding cable with a ring

terminal and drive an M4-0.7 x

6mm screw (not included)

through the terminal and into the

threaded grounding point on the

back of the device as shown

above.

Attach the other terminal of a

grounding cable directly to a

circuit breaker, ground rod or

earth ground.

This unit is powered by PoE

through a UL Listed ITE.

Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401

sales@verkada.com

All specifications are subject to change without notice

Table of Contents