Upper Rack; Upper Water Tube; Upper Spray Arm; Water Distributor - Electrolux FRIGIDAIRE FDB125RH 2 Series Service Manual

UPPER RACK

1. To remove rack, unsnap and remove retainers at
end of metal track. Once retainers are removed,
pull rack straight out.
2. Each rack roller is secured with a T-25 TORX
bolt.

UPPER WATER TUBE

1. To remove upper water tube, press in on top of
two clips and lift up.

UPPER SPRAY ARM

1. To remove upper spray arm, unscrew plastic nut
securing it to support.

WATER DISTRIBUTOR

1. The water distributor (nozzle) is screwed to the
top of the upper arm delivery tube. A rubber seal
is used on the top side of the tub to eliminate
leaks.
2. Water distribtor (nozzle) is a right-hand thread
that screws counterclockwise.
®

KICK PLATE

1. To remove kick plate and insulation (some models)
remove two Phillips screws and pull out on bottom
of kick plate.

HEATING ELEMENT

1. Disconnect dishwasher from electrical supply.
2. To remove element, disconnect wiring and remove
two element mounting nuts.
3. Lift terminal ends of element into tub and rotate
element sideways, out of retainers.
Page 22