Thermostats; High Limit Thermostat; Indicator Lamps - Electrolux FRIGIDAIRE FDB125RH 2 Series Service Manual

THERMOSTATS

1. Disconnect dishwasher from electrical supply.
2. To remove either thermostat, remove outer door
panel and kick plate.
3. Thermostats are located behind electrical junction
box. To remove thermostat, loosen single Phillips
screw, turn retainer, and drop thermostat from tub.
4. Remove wire from thermostat.
NOTE: When reinstalling thermostats, apply
thermal mastic to the face of the thertmostat.
HIGH LIMIT THERMOSTAT (ON TUB BOTTOM)
1. Disconnect dishwasher from electrical supply.
2. Disconnect wires from thermostat and remove single
Phillips screw.
3. Determine failure causing high limit thermostat to
open before replacing.
INDICATOR LAMPS - Mechanical Timer Models
1. Disconnect dishwasher from electrical supply.
2. To remove an indicator lamp, drop control panel
and rotate indicator. Lift out of mounting bracket.
NOTE: Indicators are part of the wiring harness
and are not available separately.
Page 25