Movidius Pcb Revision System - Intel Movidius MV0212 User Manual

1.6

Movidius PCB Revision System

This secnon is intended to allow the user to correctly idennfy the MV0212 board revision and serial number.
The Movidius board revision system is comprised of three components as follows:
Field
RX PCB Revision Number. Directly relates to the Printed Circuit Board. Any design change to the PCB
will result in an increment of this feld
MX Mechanical Revision Number. This relates to a component change which changes the mechanical
characterisncs of the board. Eexample: Changing a pin header to a shrouded header would
increment this feld.
EX Electrical Revision Number. This refects any electrical modifcanon to the design which does not
involve a PCB change. Eexamples: Changing resistor values, or green wire modifcanon of an
eexisnng design.
All designs start at R0M0E0 and increment felds as necessary from there.
The PCB silkscreen will contain the base revision for the PCB and supplemental labels are used thereafer to
increase the MX or EX felds.
Board
ame
Board Serial
Figure 5: Identfying PCB Revision and Serial umber (MV0212-R0)
Intel Movidius Confdennal
Table 2: PCB Revision umbering System
umber
Destripton
PCB Revision and
Elettrital Revision
11 User Manual (MV0212-UM-1.2)