Daughtercard Connecnons - Intel Movidius MV0212 User Manual

USB Host Enable
Insert Jumper to
Enable Host Mode
LCD/AP
Expansion
SD Card
Interfate Slot
1.5 Daughtertard Connettons
The three daughtercard connecnons on the PCB use a common connector type. However, it is important to
note that this does not imply that daughtercards are companble between the diferent eexpansion ports.
Some specifc camera daughtercards may be designed to be companble between the CAM_A and CAM_B
interfaces, but as a general rule daughtercards are designed specifcally for the intended eexpansion port.
Users must take care to ensure that daughtercards are only attached to the intended eexpansion port. There
are no physical interlocks in the design to prevent incorrect daughtercard attachments.
Intel Movidius Confdennal
Power Management
Daughtertard tonnettor
Figure 4: MV0212-R0 PCB Bottom Overview
10
I2C0 SDA TP
I2C0 SCL TP
SPI Monitor
Test Points
Slave Selett 0
I2C1 SDA TP
I2C1 SCL TP
I2C2 SDA TP
I2C2 SCL TP
User Manual (MV0212-UM-1.2)