Mocka Hatcher Desk Assembly Instructions Manual

Hatcher Desk
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A B
bolt and nut 12mm
set x12 screw x3 screw x10
F G
12mm hook
screw x19 x2
K L
25mm wall plug
screw x2 x2

Hardware Supplied

Phillips and Flathead screwdrivers required.
For quicker assembly, we recommend the use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
C D
30mm 50mm 50mm
screw x4 screw x4
H I
holder organiser
x1 top x1
M
safety
strap x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
E
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those supplied.
J
feet
x4
1