Cable Box Connection; Cablecard Connection - Panasonic TH-42PD25U/P Operating Instructions Manual

Cable Box Connection

• When you enjoy the cable TV programs only, connect the cable TV's cable to ANTENNA (A). When you enjoy both the
terrestrial TV programs and the cable TV programs, connect the cable TV's cable to ANTENNA (A), and the terrestrial
antenna cable to ANTENNA (B).
• Select the antenna mode in Input Setup (see page 22).
Back of the TV
B ANTENNA
Less than
4" (10 cm)

CableCARD Connection

CableCARD allows you to tune digital and high definition cable channels through the cable antenna. Consult your cable
company on the availability of CableCARD.
Procedure
1. Connect the cable antenna to ANTENNA (A).
2. Turn the TV on (see page 19).
3. Set the input mode to TV (see page 20).
4. Insert the CableCARD (as it's upper side facing to your side) into CABLE CARD slot on the back of the TV.
Follow the messages displayed on the screen.
Notes:
• If you experience keyboard or remote control function hang-up when using CableCARD, unplug the TV and plug it back
on and try the controls again. If this condition still exists, please call Panasonic Customer Call Center for further instructions.
• Do not insert a PCMCIA card into CABLE CARD slot.
A
Cable In
Ferrite core (large size)
(supplied)
Back of the TV
CABLE CARD
DIGITAL AUDIO
SERVCE ONLY
OUT
CABLE BOX
ANT OUTPUT
ANT INPUT
B ANTENNA A
Cable In
Upper side of the card
Cable Connection
Incoming cable
13