Panasonic TH-42PD25U/P Operating Instructions Manual page 47

Folders and Files
• Photo Viewer can only show still images recorded by a digital still camera with DCF
∗DCF (Design rule for Camera File system)
Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).
• Memory cards must be formatted with FAT12 or FAT16 in order to be viewed on TV. If the card is not formatted, it may
cause incompatibility with certain memory card adapters. If this happens, reformat the card using your digital camera.
Reformatting the card will erase the images stored in it. Refer to your camera manual for more information.
• Maximum number of folders that can be displayed: 100.
• Maximum number of files that can be displayed: 3,000.
• Picture resolution: Compatible in the range 64 x 64 - 8,192 x 8,192 (sub-sampling 4:2:2 or 4:2:0)
• If the image is imported from a PC, it must follow the EXIF (Exchangeable image file format) 2.0, 2.1, 2.2 in addition to the
DCF (design rule for Camera File system) format.
• The JPEG modified using a PC will not be displayed on TV.
• The Photo Viewer cannot display Motion JPEG and still image not DCF formatted (i.e. TIFF, BMP).
• If the file is partially corrupted, it may be shown in lower resolution.
• The displayed image size depends on the recorded size.
Example folder structure
JPEG images in all the folders are displayed sequentially.
ROOT
DCIM
Notes:
• Folder and file names may vary according to the digital still camera.
• Use the characters "a-z", "A-Z", "0-9" and "_" to name a directory or a file. Do not use two-byte characters or
other special codes.
100_PANA
P1000001.jpg
P1000002.jpg
P1000003.jpg
P1000004.jpg
101_PANA
P1010001.jpg
P1010002.jpg
P1010003.jpg
P1010004.jpg
∗
and EXIF standard JPEG file.
Created automatically
Folder names consist of a 3-digit folder number
which is followed by five arbitrary characters.
File names consist of four arbitrary characters
followed by a 4-digit file number.
Photo Viewer
47