Amplifier Connection (To Audio Amp); Program Out Connection (Prog Out) - Panasonic TH-42PD25U/P Operating Instructions Manual

Cable Connection

Amplifier Connection (TO AUDIO AMP)

For a full Home Theater sound experience, an external Dolby Digital
connected to the DIGITAL AUDIO OUT terminal on the TV.
∗
Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth
channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer
channel.
Amplifier
Procedure
1. Select Speakers "Off" in Audio menu (see page 29).
2. Adjust the amplifier volume to the desired level.
Notes:
• External speakers cannot be connected directly to TO AUDIO AMP terminals.
• When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC
channel is selected, the output will be PCM.

Program Out Connection (PROG OUT)

See optional equipment manual for further instructions for recording and monitoring.
VCR
Notes:
• When a device (STB, DVD, etc.) is connected to the HDMI terminal (see page 14), no video or audio is output due to
license restrictions.
• Program Out signal may not be available when COMPONENT input (see page 20) is selected for the Main picture during
PIP or SPLIT operation (see pages 52, 54).
• When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be output
through Program Out terminals.
• Some programs contain Macrovision signal to prevent VCR recording.
16
Optical digital audio cable
OPTICAL IN
or
AUDIO INPUT
Audio cable
L
R
MONITOR
VIDEO
OR
AUDIO
∗
decoder and a multichannel amplifier must be
Back of the TV
COMPONENT VIDEO INPUT
INPUT
1 2
S VIDEO
PROG OUT
VIDEO
L
TO AUDIO
AMP
R
Video cable
Audio cable
L
R
1 2
Y
DIGITAL AUDIO
P
B
OUT
VIDEO
P
R
Back of the TV
COMPONENT VIDEO INPUT
1
INPUT
1 2
S VIDEO
PROG OUT
VIDEO
L
TO AUDIO
AMP
R
2
Y
P
B
VIDEO
P
R