Hdmi Connection - Panasonic TH-42PD25U/P Operating Instructions Manual

Cable Connection

HDMI Connection

HDMI ∗
1
(High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports
uncompressed standard. The HDMI terminal supports both video and audio information.
To the HDMI ∗ input terminal, you can connect an EIA/CEA-861/861B ∗
1
a Set Top Box or DVD player with HDMI or DVI output terminal.
Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to this HDMI terminal, so you
can display the high-definition pictures on this TV in the digital form.
Compatible VIDEO Signal
1080i
480p
480i
Notes:
• This input terminal is not intended for use with computers.
• 1080i signals will be re-formatted to view on your plasma display.
Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48 kHz / 44.1 kHz / 32 kHz
Notes:
• This HDMI connector is Type A.
• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or
VIDEO input terminal on the TV so you can enjoy an analog signal.
• The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals. Set the Digital Set -Top -Box
DIGITAL OUT terminal Output setting to 1080i, 480i or 480p. For detailed information, refer to the Digital Set -Top -
Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box does not have a
DIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input or Video Input). In this
case the picture will be displayed as an analog signal.
∗
1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
∗
2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video including
high bandwidth digital content protection.
∗
3. HDMI-DVI conversion cable (TY-SCHO3DH): available on Panasonic Website (www.panasonic.com). Consult your
consumer electronics dealer for availability details.
14
AV IN
L
AUDIO IN
R
• If the external device has DVI output only, use a DVI
to HDMI adapter cable ∗
terminal.
• Connect the audio cables to the AUDIO IN terminals
for HDMI.
• Select the audio setting in HDMI In (see page 29).
No. of dots (H × V)
1,920 × 1,080i
720 × 480p
640 × 480p
720(1,440) × 480i
2
compliant consumer electronic device, such as
HDMI cable
Audio cable
3 to connect to the HDMI
Vertical scanning frequency (Hz)
59.94/60
59.94/60
59.94/60
59.94/60
Set Top Box
HDMI
DVD player
signal out