Connections; Ac Cord Connection And Fi Xing, Cable Fi Xing - Panasonic TH-50PB2U Operating Instructions Manual

Connections

AC cord connection and fi xing, cable fi xing
When using the Wall-hanging bracket (vertical) (for TH-50PB2U)
Note:
When using the Wall-hanging bracket (vertical) (TY-WK42PV20), use the holes
used on the hole , the cables may be caught by the wall-hanging bracket.
TH-50PB2U
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.
1 Attach the clamper
hole
Insert the clamper
in a hole.
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
TH-65PB2U
To remove from the unit:
snaps
Keep
pushing both
side snaps
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
and to secure the cables. If the clamper is
Bundle the cables
2
Set the
tip in the
hooks
hooks
To loosen:
Keep
pushing
knob
the knob
9