Intended use Remember that the operator may be held responsible for Your Black & Decker strimmer GL680/GL690 has been designed accidents or hazards occurring to other people or their for trimming and finishing lawn edges and to cut grass in property.
Do not expose the appliance to rain or high humidity. 13. Cutting line 14. Line storage pouch 15. Tube 16. Spool storing position Do not use heavy duty line in edging mode. Assembly Warning! Before assembly, make sure that the tool is Before using the appliance, check that your cutting path is free from sticks, stones, wire and any other objects.
Fitting the heavy duty cutting line (fig. G & L) Adjusting the height of the tool (fig. F) Your strimmer will reach you with the Reflex plus spool installed. This tool has a telescopic mechanism, allowing you to set it to To fit the HDL Heavy Duty Line cutting system, proceed as follows: a comfortable height.
Complete cassettes containing a spool of cutting line are also Fitting a new piece of heavy duty cutting line (fig. G & L) available (cat. no. 6488). Replacement pieces of heavy duty cutting line are available Unplug the tool. from your Black & Decker dealer (cat. no. A6487). To fit a new Keep the tabs (18) depressed and remove the spool cover piece of cutting line, proceed as follows: (19) from the housing (12) (fig.
To claim on the guarantee, you will need to submit proof of Technical data purchase to the seller or an authorised repair agent. You can GL680 GL690 check the location of your nearest authorised repair agent by Power input W 500 contacting your local Black &...