Location Of Controls And Components; Overview; Control Panel - Panasonic KX-FP365CX Service Manual

KX-FP365CX / KX-FM388CX

7 Location of Controls and Components

7.1.

Overview

(1) Speaker
(2) Document guides
(3) Paper tray
(4) Paper support
(5) Recording paper entrance
(6) Recording paper exit
(7) Tension plate
(8) Front cover
(9) Document exit
(10) Document entrance
(11) Green button (Back cover release button)
(12) Back cover
7.2.

Control Panel

(1) [FLASH]
• To access special telephone services or for transferring
extension calls.
• The recall/flash time can be changed (feature #072 on Pro-
gram Mode Table (P.100)).
(2) [REDIAL] [PAUSE]
• To redial the last number dialed. If the line is busy when you
make a phone call using the [DIGITAL SP-PHONE] button,
or when you send a fax, the unit will automatically redial the
number 2 or more times.
• To insert a pause during dialing.
(3) [CALLER ID]
• To use Caller ID features.
(4) [MENU]
• To start or exit programming.
(5) Navigator key
[ ][ ][ ][ ][ ][ ][PHONEBOOK][VOLUME]
• To adjust volume.
• To search for a stored item.
(6) [SET]
• To store a setting during programming.
(7) [AUTO ANSWER]
• To turn the auto answer setting ON/OFF.
(8) [MIC]
• The built-in microphone.
(9) [STOP]
• To stop an operation or programming session.
• To erase a character/number.
(10) [RECORD]
• To record your greeting message.
• To record your voice memo.
(11) [TONE]
• To change from pulse to tone temporarily during dialing
when your line has rotary/pulse service.
(12) [MUTE]
• To mute your voice during a conversation. Press again to
resume the conversation.
54