Panasonic KX-FP365CX Service Manual page 157

15.1.2.1. Maintenance List
No. OPERATION
1 Document Path
2 Rollers
3 Platen Roller
4 Thermal Head
5 Sensors
6 Glass
7 Abnormal, wear and tear
or loose parts
15.1.2.2. Maintenance Cycle
No. Item
1
Separation Roller (Ref. No. 137)*
2 Separation Rubber (Ref. No. 10)
3 Document Exit Roller (Ref. No. 8)
4 Paper Exit Rollers (Ref. No. 68, 69)
5 Document Support Roller
(Ref. No.104)
6 Thermal Head (Ref. No. 96)
7 Platen Roller (Ref. No. 54)
8 Pickup Roller (Ref. No. 46)
Note:
1
* These values are standard and may vary depending on usage conditions.
2
* Refer to Cabinet, Mechanical and Electrical Parts Location (P.193).
CHECK
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp cloth then dry thor-
oughly.
If the platen is dirty, clean it with a damp cloth then dry
thoroughly. Remove the paper and film cartridge before
cleaning.
If the thermal head is dirty, clean the printing surface with a
cloth moistened with denatured alcohol (alcohol without
water), then dry thoroughly.
Confirm the operation of the following sensors.
• Document top sensor (SW337) on the Operation Board
• Document set sensor (SW338) on the Operation Board
• Film detection sensor (SW501) on the Sensor Board
• Cover open sensor (SW502) on the Sensor Board
• Paper top sensor (PS401) on the Interface Board
If the glass is dirty, clean them with a dry soft cloth.
Replace the part. Check if the screws are tight on all parts. —
Cleaning Cycle
3 months
2
7 years*
3 months
7 years*
3 months
7 years*
3 months
7 years*
3 months
7 years*
3 months
7 years*
3 months
7 years*
3 months
7 years*
—
Refer to Document feeder/scanner glass
cleaning (P.165).
—
Refer to Thermal Head Cleaning (P.166).
Refer to Maintenance Check Items/Component
Locations (P.156).
Refer to Document feeder/scanner glass
cleaning (P.165).
Replacement
Cycle
(31,500 documents) Refer to How to Remove the Gear Block and
1
Separation Roller (P.149).
1 (31,500 documents) Refer to How to Remove the Separation Rubber
(P.153).
(31,500 documents) Refer to How to Remove the Operation Board,
1
LCD, MIC Board and Document Exit Roller (P.152).
(31,500 documents) Refer to How to Remove the Paper Exit Roller and
1
Cassette Lever (P.145).
1 (31,500 documents) Refer to How to Remove the Image Sensor (CIS)
(P.141).
(31,500 documents) Refer to How to Remove the Thermal Head (P.142).
1
1 (31,500 documents) Refer to How to Remove the Back Cover and
Platen Roller (P.143).
(31,500 documents) Refer to How to Remove the Pickup Roller (P.144).
1
157
KX-FP365CX / KX-FM388CX
REMARKS
Procedure