Table of Contents
Advertisement
Switch and Module Weights and Quantities
Switch and Module Weights and Quantities
Component
Cisco Nexus 9332D-GX2B Chassis (N9K-C9332D-GX2B)
Fan Module
– Port-side intake (burgundy) (NXA-SFAN-35CFM-PI)
Power Supplies
– 1500-W AC port-side intake (burgundy) (NXA-PAC-1500W-PI)
Transceiver and Cable Specifications
To determine which transceivers, adapters, and cables are supported by this switch, see
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Note
Some power supplies have capabilities that are greater than the maximum power requirements for a switch.
To determine the power consumption characteristics for the switch, use the typical and maximum requirements
that are listed in the following table.
Switch
Cisco Nexus
9332D-GX2B
Power Specifications
Power specifications include the specifications for each type of power supply module.
Cisco Nexus 9332D-GX2B NX-OS Mode Switch Hardware Installation Guide
36
Typical Power
Maximum Power
Consumption (AC or DC)
Consumption (AC or DC)
638 W
1442 W
System Specifications
Weight per Unit
Quantity
28 lb (12.7 kg)
1
—
6
0.26 lb (0.12 kg)
—
2 (1 for
operations
2.64 (1.2 kg)
and 1 for
redundancy)
https://www.cisco.com/
https://www.cisco.com/c/en/us/support/
Heat Dissipation
Requirement
4,920.308 BTUs
Advertisement
Table of Contents
