HIKVISION DS-7604NI-KI/W User Manual page 76

 To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA
(Video Content Analysis) triggered recording, you must configure the motion detection
settings, alarm input settings or VCA settings as well. For detailed information, refer to
Chapter 9 VCA Alarm and Chapter 10 VCA Search.
 The VCA settings are only available to the smart IP cameras.
Repeat the above edit schedule steps to schedule recording for other days in the week. If
the schedule can also be applied to other days, click Copy.
V. Click OK to save setting and back to upper level menu.
VI. Click Apply in the Record Schedule interface to save the settings.
Draw the schedule:
●
I. Click on the color icons, you can choose the schedule type as continuous or event.
Network Video Recorder User Manual
Figure 5-8 Copy Schedule to Other Days
Figure 5-9 Draw the Schedule
75