HIKVISION DS-7604NI-KI/W User Manual page 125

If alarms are triggered simultaneously in several channels, their full-screen images will be switched
at an interval of 10 seconds (default dwell time). A different dwell time can be set by going to
Menu >Configuration>Live View > Full Screen Monitoring Dwell Time.
Auto-switch will terminate once the alarm stops and you will be taken back to the Live View
interface.
You must select during "Trigger Channel" settings the channel(s) you want to make full screen
monitoring.
 Audible Warning
Trigger an audible beep when an alarm is detected.
 Notify Surveillance Center
Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host
refers to the PC installed with Remote Client.
The alarm signal will be transmitted automatically at detection mode when remote alarm host is
configured. Please refer to Chapter 11.3.5 Configuring More Settings for details of alarm host
configuration.
Email Linkage
Send an email with alarm information to a user or users when an alarm is detected.
Please refer to Chapter 11.3.7 Configuring Email for details of Email configuration.
 Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
Step 1 Enter Alarm Output interface.
Menu > Configuration > Alarm > Alarm Output
Step 2 Select an alarm output and set alarm name and dwell time. Click Schedule button to set the
arming schedule of alarm output.
If "Manually Clear" is selected in the dropdown list of Dwell Time, you can clear it only by going to
Menu > Manual > Alarm.
Network Video Recorder User Manual
124