Step 5 Insert the U flash disk to your device, and export the GUID file to the U flash disk in the Reset
Password interface. Please refer to Chapter2.1.5 Resetting Your Password for the
instructions of password resetting.
Please keep your GUID file properly for future password resetting.
If Admin's password is modified, the following menu pops up. Optionally, click the Yes
button to duplicate the password to IP cameras that are connected with default protocol.
2.1.3 Using the Unlock Pattern for Login
For the Admin user, you can configure the unlock pattern for device login.
Configuring the Unlock Pattern
Step 1 After the device is activated, you can enter the following interface to configure the device
unlock pattern.
Network Video Recorder User Manual
Figure 2-3 Export GUID File Remind
Figure 2-4 Export GUID File
Figure 2-5 Attention Interface
26