Furuno FE-700 Operator's Manual page 9

1.11 User Setting
1.12 Auto Set Mode
1.13 Alarm
1.14 Logbook Display
2 TRANSCEIVER CHARACTERISTICS (BUILT IN DISPLAY UNIT)
2.1 Transmit Frequency
2.2 Output Power
3 DIGITAL DEPTH INDICATOR
3.1 Display
3.2 Depth Indication
3.3 Power supply
3.4 Coating color
3.5 Waterproofing
4 TRANSDUCER TYPE AND BEAMWIDTH
4.1 50B-6B (50 kHz):
4.2 200B-8B (200 kHz):
5 INTERFACE
5.1 Serial Input Data
5.2 Serial Output Data
5.3 Serial I/O Data
Output
Gain, Range, Alarm, Draft, Brilliance, Dimmer, Color, Auto
Gain, range and clutter will be automatically adjusted.
Shallow water (default 20 m), Bottom lost, Power drop
Depth, Internal clock, L/L*
1 hour at 5 sec Interval, 12 hours at 1 minute interval and 24
hours at 2 minutes interval
*: External navigational sensor required.
50 kHz or 200 kHz
600 Wrms
4.5-inch monochrome LCD
**.* m (less than 100m)
**** m (100 m or more)
24 VDC, 150mA
Panel: N3.0, Chassis: 2.5GY5/1.5
IPX5
35°
6°
IEC61162-1, current loop; 1 port
RMA: L/L, ground track speed, Track
RMC: L/L(GPS), ground track speed, Track, Time
GLL: L/L
GGA: L/L
VTG: Ground track speed,
Track (True/Magnetic selected on menu)
ZDA: Time
IEC61162-1, output period: 1 sec.; 3 outputs/
1 port
SDDPT: Depth (m), Draft (m)
SDDBT: Depth (ft, m, fa) below transducer
SDDBS: Depth (ft, m, fa) below sea surface
RS-232C, 1 port
Depth, clock, L/L, ship's speed, course
SP - 2 E2366S01Q