BARIX ANNUNCICOM 155 Quick Install Manual

Rugged ip paging, intercom and voip device

Hide thumbs Also See for ANNUNCICOM 155:

Download this manual

ANNUNCI COM

155

Quick Install Guide Version 1.1

Rugged IP Paging, Intercom

and VoIP device

Package contents

a Annuncicom 155

b Quick Install Guide

Recommended Accessory Kit contents (not included in this package)

c Ethernet Cable 3 m (M12 "D" male / RJ45 male)

d Power supply (M12 "A" female)

e* Audio + I/O plug (Shielded D-sub 15 pin male)

f* RS-485 plug (M12 "A" female)

* Intended for application-specific cabling

Support

For support please contact your local dealer or visit www.barix.com.

without notice. All mentioned trademarks belong to their respective owners

and are used for reference only. Barix, Annuncicom and SonicIP are trade-

marks of Barix AG, Switzerland, and are registered in certain countries.

Need help?

Do you have a question about the ANNUNCICOM 155 and is the answer not in the manual?

Page 1 Support For support please contact your local dealer or visit www.barix.com. © Barix AG 8/2010, all rights reserved.All information is subject to change without notice. All mentioned trademarks belong to their respective owners and are used for reference only. Barix, Annuncicom and SonicIP are trade-...
Page 2 Not connected Microphone - [Cold] Top view Green and red LEDs for device status display ANNUNCICOM 155 Green LED for Link and yellow LED for Activity status display of Ethernet switch port 1 Green LED for Link and yellow LED for...
Page 3 5 minutes). If you know the values for the other fields enter them, ii) If you did not connect audio, launch the “Barix otherwise leave them at default (“0.0.0.0”). Discovery Tool” and click the “Get” button to find out which IP address the device has obtained (see Hit the “Apply”...
Page 4 2 digits). documentation, latest firmware, support and access to Type into the windows command window the user forum please visit www.barix.com. arp -s 192.168.0.6 00-08-E1-00-B1-77 or on a OSX or Linux system type into the terminal arp -s 192.168.0.6 00:08:E1:00:B1:77...

2010.9098