Related Manuals for BARIX Annuncicom 1000
Summary of Contents for BARIX Annuncicom 1000
- Page 1 ANNUNCICOM ANNUNCICOM 1000 Network intercom and PA component for commercial, industrial and security applications Quick Install Guide Version 1.0...
- Page 2 STEP 1 Plug a standard (straight) network cable (not included) into the network port (K) of the Annuncicom 1000 and the other end into your hub or switch. You can also use a 1 Reset button (Press this button shortly to reset the crossover network cable (not included) for a direct device.
- Page 3 Network configuration by web browser STEP 1 Open your web browser. STEP 2 Enter the IP address of the Annuncicom 1000 and press Enter. Example: 192.168.0.12 STEP 3 Click on the Configuration button. STEP 6 Hit <s> to skip network discovery if not connected to a...
- Page 4 Read the manual to configure the functionality of the Annuncicom 1000. STEP 3 Check the section “Updating the device”. STEP 4 Check out the Barix user forum on www.barix.com for additional information. STEP 10 Type in <9> and hit <enter> to save the Network Support configuration.
Need help?
Do you have a question about the Annuncicom 1000 and is the answer not in the manual?
Questions and answers