SpectraLink 75 Series Disassembly Instructions

This document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of Spectralink products to remove components and materials requiring
selective treatment, as defined by EU Directive 2002/96/EC Waste Electrical and Electronic Equipment
(WEEE)
Product Name
: Handset / 75XX

Items Requiring Selective Treatment

The following components should be disposed of or recovered separately from other recyclable items, in compliance
with Article 4 of EU council Directive 75/442/EEC
Enter the quantity of items below contained within the product in the right column, as applicable.
Item Description
Printed Circuit Boards or Printed
Circuit Assemblies
Batteries
Mercury Containing components
Liquid Crystal Displays (LCD) with a
surface greater than 100 sq cm
Cathode Ray Tubes
Electrolytic capacitors / condensers
External electrical cables and cords
Gas Discharge lamps
Plastics containing brominated
flame retardants weighing >26g
Components and parts containing
toner and ink
Parts and materials containing
refractory ceramic fibers
Tools required to disassemble the product where components and materials in table above can be
removed.
Tool Description
Phillips Screwdriver
1 Disassembly Instructions Form Doc # | Polycom, Inc.
Product End-of-Life Disassembly Instructions
With surface greater than 10 sq cm
All types including standard alkaline and
lithium coin or button style batteries
For example, mercury lamps, display
backlights, scanner lamps, switches,
batteries
Includes background illuminated displays
with gas discharge lamps
measuring greater than 2.5 cm diameter or
height
Does not include PCBs or PCAs
Notes
Quantity in
product
1
1 Lithium-ion
no
no
no
no
no
no
no
no
no
Tools Size (if
Applicable)
Tx 6