VIVOTEK
getratio
<decimal>
getfocus
0, <positive integer>
getminspeedlv
0, <positive integer>
getmaxptspeedlv 0, <positive integer>
getmaxzspeedlv
0, <positive integer>
getmaxfspeedlv
0, <positive integer>
getminpan
0, <positive integer>
getmaxpan
0, <positive integer>
getminpanangle
<integer>
getmaxpanangle
<integer>
getmintilt
0, <positive integer>
getmaxtilt
0, <positive integer>
getmintiltangle
<integer>
getmaxtiltangle
<integer>
getminzoom
0, <positive integer>
getmaxzoom
0, <positive integer>
getmaxdzoom
0, <positive integer>
getmaxratio
<decimal>
getmaxdratio
<decimal>
368 - User's Manual
Get the current zoom ratio.
Get the current focus position.
Get the minimum speed level of the PTZ control. Normally, the speed
level is '0,' which denotes halting a continuous movement.
Get the maximum speed level of pan/tilt moving.
*Only available when "capability_camctrl_c<0~(n-1)>_buildinpt" > 0
Get the maximum speed level of zoom moving.
Get the maximum speed level of focus moving.
Get the lower limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for zoom position.
Get the upper limit for zoom position.
Get the upper limit for digital zoom position.
Get the maximum ratio of optical zoom.
* We support this parameter when the version number (getversion) is
equal or greater than 5.0.0.14
Get the maximum ratio of digital zoom.