Vivotek FD9365-HTVL User Manual page 199

s<0~(m-1)>_h 1~100
265_cbr_qperce
nt
s<0~(m-1)>_h 20000~"capability_videoin_c<0~(n-1
265_bitrate )>_h265_maxbitrate"
s<0~(m-1)>_h framerate,imagequality
265_prioritypoli
cy
s<0~(m-1)>_h 1~"capability_videoin_c<0~(n-1)>_h
265_maxframe 265_maxframerate"
s<0~(m-1)>_h Available values are listed in "
265_profile capability_videoin_c<0~(n-1)>_h265
_profile"
s<0~(m-1)>_h <boolean>
265_smartq_en
4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when "ratecontrolmode"=
cbr and "quant"= 100.
* Only available when
"capability_smartstream_version" >=
"2.0"
4/4 The target bit rate in constant bit rate
mode.
* Only available when h265 is listed in
"capability_videoin_codec".
*
Only valid when "ratecontrolmode"=
cbr
4/4 Set prioritypolicy
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when "ratecontrolmode"=
cbr
1/4 The maximum frame rates of a H265
stream at different
resolutions("capability_videoin_c<0~
(n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_h26
5_maxframerate"
* Only available when h265 is listed in
"capability_videoin_codec".
1/4 Indicate H265 profiles
* Only available when h265 is listed in
"capability_videoin_codec".
4/4 Enable "Smart Q" function.
* Only available when h265 is listed in
VIVOTEK
User's Manual - 199