Vivotek FD9365-HTVL User Manual page 194

VIVOTEK
s<0~(m-1)>_e <boolean>
nableeptz
s<0~(m-1)>_c Listed at "capability_videoin_codec"
odectype Possible values are: mjpeg,
h264,h265
<product dependent>
s<0~(m-1)>_re Available options are list in
solution "capability_videoin_c<0~(n-1)>_reso
lution".
Besides, available options is referred
to
"capability_videoin_c<0~(n-1)>_ma
xresolution" and
"capability_videoin_c<0~(n-1)>_min
resolution"
s<0~(m-1)>_s <boolean>
martfps_enable
s<0~(m-1)>_h <boolean>
264_dintraperio
d_enable
s<0~(m-1)>_h 250, 500, 1000, 2000, 3000, 4000
264_intraperiod
s<0~(m-1)>_h cbr, vbr
264_ratecontrol
mode
s<0~(m-1)>_h 1~5,
264_quant 99, 100
194 - User's Manual
or greater than 0310a.
4/4 Indicate whether stream supprts eptz
or not
1/4 Codec type for this stream
1/4 Video resolution in pixels.
4/4 Enable "Smart fps" function.
* Only available when
"capability_videoin_c<0~(n-1)>_sma
rtfps_support" is 1.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0309a.
4/4 Enable "Dynamic intra frame period".
* Only available when
"capability_videoin_c<0~(n-1)>_dint
raperiod_support" is 1.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0301c.
4/4 The time interval between two
I-frames (Intra coded picture).
The unit is millisecond (ms).
4/4 cbr: Constant bit rate mode.
vbr: Fixed quality mode, all frames are
encoded in the same quality.
4/4 Set the pre-defined quality level:
1: Medium