Table of Contents
Advertisement
tour_i<0~19>_checklist
tour_i<0~19>_dwelltime
7.43 UART control
Group: uart
(capability.nuart > 0 and capability.fisheye = 0)
NAME
ptzdrivers_i<0~19,
127>_name
ptzdrivers_i<0~19,
127>_location
enablehttptunnel
Group: uart_i<0~(n-1)> n is uart port count
NAME
baudrate
databit
paritybit
stopbit
string[512]
string[512]
VALUE
SECURITY
(get/set)
string[40]
1/4
string[128]
1/4
<boolean>
1/4
(capability.nuart > 0 and capability.fisheye = 0)
VALUE
SECURITY
(get/set)
300,600,1200,2400
4/4
,4800,9600,19200,
38400,57600,11520
0
5,6,7,8
4/4
none,
4/4
odd,
even
1,2
4/4
greater than 0307a.
1/4
The indexes of preset positions,
separated by ","
1/4
Preset tour: time to wait before moving
to the next preset position, separated by
","
Recorded tour: number of seconds to
wait
before continuing a loop tour.
DESCRIPTION
Name of the PTZ driver.
Full path of the PTZ driver.
Enable HTTP tunnel channel to control UART.
DESCRIPTION
Set baud rate of COM port.
Data bits in a character frame.
For error checking.
"1": One stop bit is transmitted to indicate the
end of a byte.
"2": Two stop bits are transmitted to indicate
the end of a byte.
If you want to transfer the stopbit for 150% of
the normal time used to transfer one bit, the
uart_i<0~(n-1)>_stopbit should be set as 2
VIVOTEK
User's Manual - 327
Advertisement
Table of Contents
