Vivotek FD9365-HTVL User Manual page 189

enableblc <boolean>
<Not support
anymore>
maxgain 0~100
mingain 0~100
gainvalue 0~100
"capability_image_c<0~(n-1)>_iristy
pe"=piris
4/4 Enable backlight compensation
* Not support this parameter anymore
when the version number
(httpversion) is equal or greater than
0301a.
* It's recommanded to use
"exposurewin_c<0~(n-1)>_mode" to
switch on/off BLC.
4/4 Maximum gain value.
0: Low <-> 100: High
* Only available when
"capability_image_c<0~(n-1)>_agc_
maxgain" != "-"
* Only valid when
"piris_mode"=manual or
"irismode"=fixed
* Normalized range.
* Only available when
"capability_image_c<0~(n-1)>_expo
sure_rangetype" is "twovalues".
4/4 Minimum gain value.
0: Low <-> 100: High
* Only available when
"capability_image_c<0~(n-1)>_agc_
mingain" != "-"
* Only valid when
"piris_mode"=manual or
"irismode"=fixed
* Normalized range.
* Only available when
"capability_image_c<0~(n-1)>_expo
sure_rangetype" is "twovalues".
4/4 Gain value.
0: Low <-> 100: High
* Only available when
VIVOTEK
User's Manual - 189