Table of Contents
Advertisement
VIVOTEK
trigger
triggerstatus
di
mdwin
mdwin0
vi
304 - User's Manual
boot,
6/6
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
visignal,
vadp,
smartsd
<product dependent>
string[40]
6/6
0,<positive integer>
6/6
0,<positive integer>
6/6
0,<positive integer>
6/6
0,<positive integer>
6/6
Indicate the trigger condition:
"boot" = System boot.
"di"= Digital input.
"pir"= PIR detection.
"motion" = Video motion detection.
"seq" = Periodic condition.
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger).
"volalarm"= Audio detection.
"smartsd"= Lifetime detection of SD card.
"shockalarm" = Shock detection.
"virestore" = Video input signal restore.
"vadp" = VADP trigger.
The status for event trigger
Indicate the source id of di trigger.
This field is required when trigger condition is
"di".
One bit represents one digital input. The LSB
indicates DI 0.
* Only available when "capability_ndi" > 0
Indicate the source window id of motion
detection.
This field is required when trigger condition is
"md".
One bit represents one window.
st
The LSB indicates the 1
For example, to detect the 1
set mdwin as 5.
Similar to mdwin. The parameter takes effect
when profile 1 of motion detection is enabled.
Indicate the source id of vi trigger.
This field is required when trigger condition is
"vi".
One bit represents one digital input. The LSB
indicates VI 0.
window.
st
rd
and 3
windows,
Advertisement
Table of Contents
