MG 6 Manual page 211

driver to stabilize the vehicle and prevents it from moving,
with no need for depressing the brake pedal all the time.
With the accelerator pedal depressed, auto hold system
releases the brake immediately when starting off, and the
vehicle will move as per the gradient of the road.
Auto hold has 3 main states:
1 Off: Function in Off state.
2 Standby: Function in Standby state; the function is
activated but it is not parked. In Standby state, the
vehicle will automatically park once the conditions for
parking are all met.
3 Parking: Function in Parked state. In this state the
green indicator in the instrument pack illuminates.
Starting & Driving
With the driver's seat belt fastened, the door closed and
the engine running, press the auto hold switch to switch
the auto hold function from Off to Standby state.
With the brake pedal firmly pressed and the vehicle
completely stopped, the auto hold function will switch
from the Standby state to the Parking state.
When the auto hold is in the Parking state, engaging D or R
and pressing the accelerator will automatically release the
auto hold function.
4
197