Table of Contents
Advertisement
Foreword:
This manual includes several warnings, installation guidelines and safety instructions. Before
installation, please read carefully to avoid dangerous situations, which can lead to severe
physical injury, and which could also damage the pump.
The DCP pump series are typically designed to pump lightly contaminated wastewater.
The pumps are equipped with a heavy duty Epoxy coating for long operational use.
The DTP pumps are designed for professional use only.
Only trained and skilled personal may install, maintain and operate the pump.
Pump identification:
The main characteristics are given on the data plate, which is connected to the pump.
D 400V 3.6A
Type
= Pump type
Code
= Product code
No.
= Serial number
Yr
= Year of production P1
kg
= Weight [kg]
Ø
= Impeller diameter cos phi = Power factor
Power supply:
The power supply of the pump is part of the controls of the electrical installation.
Please read carefully the specific user instructions of the electrical installation.
These instructions, including the wiring diagram, are necessary for safe installation.
Usage limitations:
The DCP22 pumps are developed for normally contaminated municipal waste water.
The pumps in Basic Version may not be installed in potential explosive atmospheres
Landustrie versie 01-21 | Operation & maintenance manual DCP22
Subject to modifications
Bj.
n
In
P
Y 690V 2.1A
Type
No.
m3/h
= Capacity in duty point ~
m
= Head in duty point
rpm
= Speed
= Rated electrical power V
P2
= Shaft power
Data plate DTP
Basic version
Legenda:
= Number of phases
Hz
= Frequency
Y of D
= Connection (star or delta)
= Voltage
A
= Max. current
Cert. no. = For ATEX pumps only
3 / 16
Advertisement
Table of Contents
