Fpio1: Front Panel Switches And Indicators Header - Abit WI-2Pa User Manual

Hardware Setup
2.5.4.

FPIO1: Front Panel Switches and Indicators Header

This header is used for connecting switches and LED indicators on the chassis front
panel.
Watch the power LED pin position and orientation. The mark "+" align to the pin in
the figure below stands for positive polarity for the LED connection.
•
HD_LED: Connects to the HDD LED cable of chassis front panel.
•
RST: Connects to the Reset Switch cable of chassis front panel.
•
SPEAKER: Connects to the System Speaker cable of chassis.
•
SUS_LED: Connects to the Suspend LED cable (if there is one) of chassis
front panel.
•
PWR_ON: Connects to the Power Switch cable of chassis front panel.
•
PWR_LED: Connects to the Power LED cable of chassis front panel.
•
KEY_LOCK: Connects to the Keylock cable (if there is one) of chassis front
panel.
2-9
User's Manual