Testing the Device
Perform the test procedure to ensure the Smart Scale is working properly after
performing assembly and service procedures.
Required Items:
To test the Smart Scale:
1
2
The charging signal only illuminates when the scale is plugged into a functioning
electrical outlet.
NOTE
3
4
If the device does not operate as expected, see Troubleshooting on page 5-1.
NOTE
Calibration weights (part no. 56357)
Press and hold
while pressing
KG/LB
Verify that all lights illuminate.
Place the calibration weights on the scale, then confirm that the correct
weight displays.
Press
to turn off the scale.
ON/OFF
OLYMPIC SMART SCALE Model 50/51 Instruction Manual
.
ON/OFF
Testing the Device
2-5