To Output Arbitrary Signals; To Select The Built-In Waveform - Owon AG4081 User Manual

To Output Arbitrary Signals

Press button to call the user interface of Arbitrary signal, the Arbitrary waveform
parameters can be set by operating the Arbitrary setting menu on the right.
The menu items of Arbitrary waveform are: Frequency/Period, Amplitude/High Level,
Offset/Low Level, Built-in Waveform, Editable Waveform. You can operate the menu by
using the menu selection buttons on the right.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, please refer to "To
Output Sine Signals" on P11.
The frequency range is 1μHz - 10MHz; the period range is 100ns - 1Ms.
The Arbitrary signal consists of two types: the system built-in waveform and the
user-definable waveform.
Current parameter
Parameter bar 1
Load
Amplitude
Offset
Parameter bar 2
Figure 5-11: The User Interface of Arbitrary Signal

To Select the Built-in Waveform

There are 26 built-in Arbitrary waveforms.
Menu
Common StairD/StairU/StairUD/Trapezia/RoundHalf/
AbsSine/AbsSineHalf/SineTra/SineVer
Maths ExpRise/ExpFall/Sinc/Tan/Cot/Sqrt/x^2
Window Rectangle/Gauss/Hamming/Hann/Bartlett/
Blackman/Laylight
Others DC/Heart/Round
Back
Steps for selecting the built-in waveform:
5.Front Panel Operation
Frequency
Built-in
Exponential Rise
Waveform
Settings
18
Current signal
Setting menu of
Arbitrary signal
Explanation
Choose common Waveforms
Choose Math Waveforms
Choose Window Waveforms
Choose other Waveforms
Back to the previous menu