Power Checking - FiberHome AN5506-04-FA Instruction

7. Dynamic DNS
Example: You apply Dyndns's Host by use "contact2nma.dyndns.org" name, that is a domain that you can
use to view the camera from any point that no need to remember IP's received from service providers.
- Click Application(1)
The system will show the screen to fill in as
- Username/Password ; As customer defined on the web of DDNS service provider (not more than 32
characters)
- Host
provider.)
- WAN Interface
- DDNS Provider
- Click Apply(4)
- DDNS settings finished

8. Power Checking

To check Optical Power when you have internet problem such as low speed or unstable that Optical Power
not more than -28
- Click Status(1) --> Click Optical
- Received Power(3)
- Power checking finished
--> Click DDNS(2) --> Screen showing DDNS Settings
; contact2nma.dyndns.org (The name given on the web of DDNS service
; INTERNET_R_VID_33 (Choose the required WAN Name)
; www.dyndns.org (Choose a registered DDNS provider)
Info(2)
; Check Received Power not more than -28
follows(3)
--> Screen showing Optical Power