FiberHome AN5506-04-FA Instruction page 10

Step 2 Software(System Reset)
- Click Management(1)
- Click Restore(4)
- Restore Default finished
12. Ping and Traceroute
12.1 How to Ping Test
Ping Test is using in case of connection test between ONT and destination website to check that
website, if it can use normally
- Click Application(1)
- Destination
- Click Ping(4)
12.2 Traceroute Test
You can use Traceroute to check Server route connection use in case of cannot ping (the destination
website cannot be connected)
- Click Application(1)
- Destination
- Click Traceroute(4)
--> Device Management(2)
Restore factory defaults
--> Click Diagnosis(2)
Address(3) ; fill in IP, Host Name or Website
to start connection test
--> Click Diagnosis(2)
Address(3) ; fill in IP, Host Name or Website
--> Click Restore(3)
--> Screen showing Diagnosis
--> Screen Showing Diagnosis