FiberHome AN5506-04-FA Instruction page 7

6. Forward Port Settings
Forward Port Settings is Port setting for IP Address to use with other device required internal LAN to connect from
external LAN such as Mobile phone, Notebook or Computer etc
- Click Application(1)
- Click Add(3) to set other settings to Forward Port
The system will show screen to set other settings as
- WAN ; Choose INTERNET_R_VID_33
- Description ; 3BBTEST (Named that you want)
- Public Port ; 8080 (It is the inside Port number that use to view camera)
- IP ; 192.168.1.1 (It is the inside IP number that use to view camera )
- Private Port ; 8080 (It is the outside Port number that use to view camera )
- Protocol ; Choose TCP (Named that you want)
- Enable ; Set to be Enable
- Click Apply(5)
- When done, the setting's information will show
- You can use CCTV after Forward Port settings finished
- In case if you want to set more Port numbers click
information provided will show more results
--> Click Port Forwarding(2) --> Screen showing Port Forwarding
follows(4)
above(6)
Add(7) To add additional port numbers and the