FiberHome AN5506-04-FA Instruction page 6

- DHCP Start IP ; Set the begin IP Address that you want to use
- DHCP End IP ; Set the end IP Address that you want to use
- DHCP Subnet Mask ; 255.255.255.0 You can change or use as Default
- Click Apply(4)
- DHCP Settings finished
5. Bridge Mode Settings
Click Network(1) --> Click BroadBand
Follow these settings(3)
- Service Type
- Connection Type
- VLAN ID ; VLAN ID NODE
- Priority ; 0
- Click Apply(4)
- Set up the router that you want to connect to Internet, then connect both device by connecting Lan cable
to the Prepared WAN
- Bridge Mode Settings finished, you can access the internet
Settings(2)
; Choose INTERNET
; Choose Bridge
Screen showing Internet Settings