FiberHome AN5506-04-FA Instruction page 5

- Radio ON/Off ; Choose RADIO ON to open WiFi signal
- Network Mode ; 802.11 b/g/n (Choose the signal channel that you want)
- Frequency Bandwidth ; 40 MHz (Choose the signal's broadness that you want )
- Frequency (Channel) ; AutoSelect (Choose the signal that you want)
- Guard interval ; Set usage time and signal quality that you want
- Click Apply(6)
Step 2 : SSID Settings for Wireless 2.4G or Wireless 5G
- Click Advanced(7)for Wireless 2.4G or 5G
)
or just one signal
- SSID Choice(9)
- SSID Name(10)
- Passphrase(11)
depend on Security Mode)
- Click Apply(12)
- After finished, enter URL Website to access the internet
4. DHCP Settings
DHCP Settings and IP Address management is IP management and distribution that do not give duplicate IP
to protect the problem when you using
- Click Network(1)
Follow these settings(3)
- Type ; Choose Server
(Short ; to use near device / Long ; to use far from device)
after that go to step 2 to set password
; 1 (Choose the required number of signals)
; Choose Enable to open the signal
; Named that you want (not more than 32 characters)
; Enter the required password (8-63 characters can enter both letters and numbers
to record Wireless settings
--> Click DHCP Server(2)
Advanced(8) for Wireless 5G (
--> screen showing DHCP Service
You can choose to set both