Advertisement
Quick Links
JOURNEY SOLO
ONE PERSON TENT
Assembly Instructions
x1 Large curved
Orange Tip
x1 Small curved
Silver Tip
3
4
2
x19 Alloy Stakes
Lay the footprint down before erecting
the tent.
1
First unroll the shelter and locate
the pole bag and separate the poles,
clip the sections together to make a
continuous pole, the poles are held
together by elastic to help.
Pole Placement
1. Insert the Orange Tipped Pole with
Orange section to Orange trim edging.
2. Insert the Siver Tip Pole into Pole
Channel Sleeve 2.
3. Insert the tent pole ends into
the grommets in the corresponding
webbing straps.
4. Once all the pole ends are inserted
into the grommets then take the
Ultralight Alloy Stakes that came
with the Journey Solo and stake
down the corners through the
webbing straps and elasticated
loops. Add additional stakes to
other stake points as needed.
5. At this stage the Journey Solo can
be used as a stand alone insect
shelter, if so desired.
Advertisement
Related Manuals for Snugpak JOURNEY SOLO
Summary of Contents for Snugpak JOURNEY SOLO
- Page 1 Journey Solo and stake down the corners through the webbing straps and elasticated loops. Add additional stakes to other stake points as needed. 5. At this stage the Journey Solo can be used as a stand alone insect shelter, if so desired.
- Page 2 JOURNEY SOLO ONE PERSON TENT Assembly Instructions 6. Take out the Fly (Outer Tent) and unfold and spread 8. To gain access now simply unzip the fly access it out. Then drape the Fly over the main body zipper and also the inner tent access zippers.
Need help?
Do you have a question about the JOURNEY SOLO and is the answer not in the manual?
Questions and answers