Advertisement
JOURNEY SOLO
ONE PERSON TENT
Assembly Instructions
1 Curved Orange
Tipped Pole
1 Curved Silver
Tipped Pole
3
4
2
Lay out the footprint before erecting
the tent.
1
Unroll the tent, locate the pole bag,
separate the poles, clip the sections
together making continuous poles. The
poles are held together by elastic.
Pole Placement
1. Insert the orange tipped pole with
2. Insert the silver tipped pole into
3. Insert the pole ends into the
4. When all the pole ends are
5. At this stage the Journey Solo can
3
19 Alloy Stakes
orange section to orange trim edging.
pole channel sleeve 2.
grommets in the corresponding
webbing straps.
inserted into the grommets take the
ultralight alloy stakes included
with the Journey Solo, stake down
the corners through the webbing
straps and elasticated loops. Add
additional stakes to other stake
points as required.
be used as a stand-alone insect
shelter.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Snugpak JOURNEY SOLO
Summary of Contents for Snugpak JOURNEY SOLO
- Page 1 Journey Solo, stake down the corners through the webbing straps and elasticated loops. Add additional stakes to other stake points as required. 5. At this stage the Journey Solo can be used as a stand-alone insect shelter.
- Page 2 JOURNEY SOLO ONE PERSON TENT Assembly Instructions 6. Take out the fly (Outer Tent) unfold and lay out. 8. To gain access unzip the fly and inner tent zips. Drape the fly over the main body matching up the 9. When happy with the set-up, further stabilisation door and foot area, connect the two with the velcro is achieved by pegging out the guy lines.
Need help?
Do you have a question about the JOURNEY SOLO and is the answer not in the manual?
Questions and answers