Snugpak JOURNEY DUO Assembly Instructions

JOURNEY DUO
TWO PERSON TENT
Assembly Instructions
x1 Large angled
Orange Tip
x2 Large straight
Silver Tip
2
4
3
3
6
1
5
x18 Alloy Stakes
Lay the footprint down before
erecting the tent.
First unroll the inner shelter
and locate the pole bag and
separate the poles, clip the
sections together to make a
continuous pole, the poles are
held together by elastic to help.

Pole Placement

1. Insert the Silver Tip
Straight Pole with Silver
section to Black trim
edging.
2. Insert the other Silver Tip
Straight Pole with Silver
section to Silver trim
edging.
3. Clip the tent inner to the
Orange tipped pole with the
black plastic clips.
4. Insert the tent pole ends
into the grommets in the
corresponding webbing
straps.
5. Clip the tent inner to the
Silver tipped pole with the
black plastic clips.
6. Once all the pole ends are
inserted into the grommets
then take the Ultralight
Alloy Stakes that came
with the Journey Duo and
stake down the corners
with the webbing straps.
Add additional stakes
to other stake points as
needed.
7. At this stage the Journey
Duo can be used as a stand
alone insect shelter, if
so desired.