Pairing the Remote Power
35
Button
The Remote Power Button is paired with your
Grid Pad out of the box.
You may need to pair it again after changing
the batteries.
Press and hold both volume buttons on your
Grid Pad for 10 seconds. The LED on the front of
the Grid Pad will flash.
Use a pin or thin wire to press in the pairing
button, the left hole above the batteries. Press
this in for 5 seconds until the LEDs on the front
of the Grid pad will blink rapidly to confirm
pairing.
131
Need help?
Do you have a question about the GridPad 10S and is the answer not in the manual?