Advertisement
27. Attach (2) plastic collection drum handles to
collection drum using (4)
head screws,
⁄
" fender washers, and
5
16
acorn nuts (see Figure 23).
Plastic Collection
Drum Handle
(1 of 2)
Figure 23. Drum lid and handles installed on
collection drum.
28. Install larger plastic collection bag into drum.
29. Place collection drum lid seal and lid on top
of collection drum (see Figure 23).
30. Position cyclone funnel adapter and drum lid
together with (2)
3
drum lid springs, and (4)
shown in Figure 24.
x 2
Drum Lid
Springs
Figure 24. Installing cyclone funnel adapter.
Model H7509Z (Mfd. Since 01/21)
⁄
"-18 x
⁄
" Phillips
5
3
16
4
⁄
"-18
5
16
Drum Lid
Drum Seal
(Hidden by Lid)
Collection
Drum
x 4
⁄
"-16 x 11" hex bolts, (2)
8
⁄
" flat washers, as
3
8
Cyclone Funnel
Adapter
31. Install drum lid connecting plates with (2)
16 x 1" hex bolts, (4)
"-16 lock nuts (see Figure 25).
⁄
3
8
Connecting Plate
(1 of 2)
Figure 25. Installing drum lid connecting plates
on drum lid.
32. Attach collection lid handle to cyclone funnel
adapter and drum lid connecting plates with
(4)
⁄
"-16 x 1" hex bolts, (8)
3
8
and (4)
⁄
"-16 lock nuts (see Figure 26).
3
8
x 4
Drum Lid
Connecting Plate
Handle
Figure 26. Attaching collection lid handle to
connecting plate and adapter.
33. While holding assembly in place, move col-
lection drum assembly under cyclone assem-
bly. Press cyclone funnel adapter and springs
down to fit under cyclone funnel.
⁄
" flat washers, and (2)
3
8
x 2
⁄
" flat washers,
3
8
Cyclone
Funnel
Adapter
(1 of 2)
⁄
"-
3
8
-9-
Advertisement
