Centre Of Gravity Setting; Controller Height And Depth; Control System Programme - Sunrise Medical Quickie Puma 40 User Manual

20

5.3 Centre of gravity setting

In case of re-use of the wheelchair or
when adapting the seat depth, it might be
necessary to change the centre of gravity. The
wheelchair's centre of gravity can be adjusted
within the seating system (fi gure 11)

( Seating system).
Caution!
Changing the wheelchair's centre of gravity
may negatively infl uence the wheelchair's
driving characteristics and/or its dynamic
stability.
In case of doubt, contact the technical support
department at Sunrise Medical.

5.4 Controller height and depth


( Seating system)

5.5 Control system programme

This wheelchair is equipped with a control
system that can be programmed by adjusting
settings within the system. This is a specialized
job that needs training and can only be adjusted
with professional software. It's not possible and
allowed for end users to adjust these settings.
Warning!
The incorrect setting of the parameters
for the control system may result in very
dangerous situations.
Settings must be made by qualifi ed
specialists.
Puma 40
11